Creamy, pigmented and opaque, decoCrème is especially intended for modern or vintage interior design in the broadest sense. Ideal for decorating in one single coat, the range offers an array of tones: from the darkest to the lightest. The colours, with a creamy consistency, are wear-resistant. The color can be applied vertically or horizontally without dripping in a single coat. The surface must be clean and dry. The colours are dry to the touch in 30 minutes, wait 24 hours before handling. On porous surfaces, coat surface preparation with the auxiliary decoCrème Gesso (black or white) before applying colour.Use with decoCrème auxiliaries in order for endless varied effects (Gold Glitter, Silver Glitter, Image-transfer gloss gel, Phosphorescent Gel,White sand gel, Déco concrete - Relief paste).
Colours can be worked overlaid and are ideal for modern and traditional techniques (vintage effect).Perfect for recycling and refurbishing.A highly matt and patina effect on metal.
Very good results with sanding and wiping techniques. Other applications: - Chalky finish - Worked overlaid - Worked in various coats - Dry brush - Sponge - Stencil.
Ready to use.
Apply to perfectly dry deco or decoCrème colours to give them a glittery effect.
Glossy gel - image transfer
- To make the colours bright: Mix with the desired color before application or apply thinly to the dry colour.
- To work on reliefs: Work with a painting knife to create reliefs. 3- Can be used as a glue-varnish.
- To transfer images: Apply a generous coat of gloss-image transfer gel with a brush on the image to transfer (black and white or colour photocopy). Also apply to the support that is to receive the image. Place the photocopy upside down (side covered with gloss-image transfer gel) on the surface to be decorated and let it dry for 24 hours or dry with a hair dryer for 10 minutes. Observe the drying time. Lightly moisten the retuned image with your finger and peel off the paper gently. Only the ink print remains on the surface. Remove all the paper.
Ready to use.
phosphorescent gel to create luminescent decors. The decors capture sunlight and release it in the dark. Used pure with a painting knife or 3D stencil on a clean dry surface or a dry deco or decoCrème colour.
White sand gel
Used pure or mixed with decoCrème colours (50/50) for a sandy material effect.
universal coating. White covering primer for the preparation of all surfaces prior to painting. Apply on a clean and dry surface.
universal coating. Black covering primer for the preparation of all surfaces prior to painting. Apply on a clean and dry surface.
Déco concrete - Relief paste
decoCrème Concrete decorative 3D paste is a thick paste that mimics the soft material of the polished concrete, once dry. Designed to blend with colours, especially decoCrème, decoCrème Concrete decorative 3D paste is applied in volume with a painting knife to create reliefs on a clean, dry surface. Use the comb effect to burn tracks in the colour before drying.