Decorate your wooden platters with gilding leaves of PBO deco and Gédéo Crystal resin

Create a royal place setting, a new life for your favorite pieces. Make them more beautiful for this Christmas.

Materials

  • 1 set of 5 wood trays (Artémio)
  • 1 pattern: stem with leaves (Artémio)
  • Colours : P.BO Deco Cream of Colour Volcanic Red (#2) and Gold (#46)
  • 1 bottle of P.BO Deco Effet+ Gilding Paste
  • P.BO Deco Gold Leaves Gold colour
  • 1 Gédéo Crystal Resin kit
  • 1 Cobra Deco fan brush #08
  • 1 Cobra Deco flat brush #10
  • 1 fine marker
  • 1 cotton cloth
Decorate your wooden platters with gilding leaves of PBO deco and Crystal resin from Gédéo

Follow the step by step >

1set of 5 wood trays

Preparation time: 4 hours Drying time: 12 hoursCleaning of tools: soap and water

Step 1

Step 1 : Apply Volcanic Red Pebeo Cream of Colour : On the inside, and the corners of the large tray.On the entire surface of the small trays (#1 & #2) except for the top side.On the entire small tray (#3) except for the bottom inside.On the entire small tray (#4).Apply Gold Pebeo Cream of Colour on all remaining surfaces

Step 2

Step 2 :Once the paint on the trays has dried, apply the stencil to the bottom surface of the large tray and small trays (#1 & #4).  Then, trace the leaves and the stem.

Step 3

Step 3 : With a flat brush, apply a thin coat of P.BO Deco Effet+ Gilding Paste to the outside of the outlined pattern that was just drawn on the large tray and small tray (#1). Also, apply a thin coat of Gilding Paste to the inside of the pattern that was just drawn on the small tray (#4). As soon as the Gilding Paste becomes transparent, apply gold leaves with a dry fan brush. Then, use a cotton cloth to polish the surface.

Step 4

Step 4 : Crystal Resin Preparation: pour one part of hardening + 2 parts of resin into a clean container.  Slowly stir mixture for a few minutes. Next, pour the mixture into the center of the 5 trays. If needed, repeat the first part until all of the trays are covered.  Once complete, cover each tray with cardboard to prevent dust from sticking to the resin. Wait 12 hours.

The result

The wood trays decorated