Spirales

Material

  • 1 Canvas board 13 x 18 cm (ref 777391)
  • 1 Fan brush n° 6 (ref 951170)
  • 1 Dropper (ref 166301)
  • 1 Shaper
  • 1 Stir stick
  • Masking tape

STUDIO ACRYLICS HIGH VISCOSITY
Crackling effect modeling paste (ref 524440)
CERNE RELIEF
Transparent (ref 773620)
VITRAIL
Lightening medium (ref 051000)
Lemon (ref 050-023)
Turquoise (ref 050-017)
FANTASY PRISME
Caribbean blue (ref 166039)

Difficulty level :   ***
Completion time : 30 min
Drying time : 37h

TIP: The more Modeling paste you apply, the greater the crackling effect will be.

Products
Step2

Next, apply a thick layer of step 2. Draw spirals with the help of the shaper while the modeling paste is still wet. Remove the sellotape and allow to dry for approximately 12 hours.

Etape2_2
Etape2_3
Step3

On the outside of the crackling effect modeling paste section, complete the spirals with the transparent Cerne Relief.

Step4

Mix the lemon Vitrail colour (50/50) with the lightening medium, using a fan brush to generously apply to the centre of this painting. Do the same with the turquoise Vitrail colour for the rest of the canvas.

Etape4_2
Step5

Mix the caribbean blue Prisme with the stir stick, then generously apply with the dropper to the Cerne Relief closed circles. Allow to dry for around 24 hours.

Materiel
Step1

Tape off 1/3 of the canvas board with masking tape. Apply step one of the crackling effect modeling paste in the taped off section using the fan brush. Allow to dry for approximately 30 min

Ambiance