Decorative auxiliaries - deco

Tool for transferring images printed on paper (magazine page, colour copy, etc.) onto the material of your choice !

Decorative auxiliaries - deco

DECO AUXILIARIES 75 ML IMAGE TRANSFER

Product description

Tool for transferring images printed on paper (magazine page, colour copy, etc.) onto the material of your choice !

The + products

For transferring images from paper documents onto the surface of your choice

Properties

Based: Water
Target: Professional - Craftsman, Adult, Amateur beginner, Confirmed amateur
Format: 75 ml

Instructions

Old fashioned varnish

PACKAGING : 75ml bottle

Dangerous - Respect the precautions of use

Water based varnish, Gloss/Matte

OPACITY : Transparent

FINISH : Glossy / Matt

SURFACES: wood, plaster, glass, metal, cardboard...

COVERED SURFACE: 75 ml ≈ 0,75 m²

CLEANING OF BRUSHES: With soapy water.

PACKAGING: 75ml bottle

Applications :

Apply to perfectly dry deco colors. Touch dry in 1 hour. Handling after 2 hours

Grey green patina kit

OPACITY : Opaque

FINISH : Matte oxidized bronze

SURFACES: wood, plaster, glass, metal, cardboard...

COVERED SURFACE: 1kit = approximately 0,75m²

CLEANING OF BRUSHES: With soapy water

PACKAGING : 75ml bottles

Dangerous - Follow the precautions of use.

Applications:

After shaking the bottle well, apply the Bronze Undercoat on the support of your choice: plaster, earth, wood, metal treated against rust and insulated with varnish, glass, cardboard....After complete drying, pass without excess a coat of oxidizer.

The Verre de Gris patina will gradually appear after 10 minutes and will continue for several hours. To fix the effect, spray Pebeo Pastel and Charcoal Fixative (ref: 571140) after drying.

Image Transfer

OPACITY : Transparent

FINISH : Matte

SUPPORTS: wood, plaster, glass, metal, cardboard...

CLEANING OF BRUSHES: With soapy water. PACKAGING : 75ml bottle

APPLICATIONS :

Apply on the printed image 3 successive Image Transfer coats observing a 30 min laying time between each passage.

Let dry 2 hours.

Soak for a few minutes in warm water and then film the image with your finger or with a damp sponge. Rub gently to remove all the paper and leave only the image transferred in the varnish. The image appears transparent in the varnish.

Allow to dry for 2 hours, then cut the design more finely if necessary. Next, apply a layer of Image Transfer onto the substrate. Finish with a final protective coat.

Mixtion

OPACITY : Transparent

SUBSTRATE : wood, plaster, glass, metal, cardboard...

COVERED SURFACE: 75ml = 0,75m².

CLEANING OF BRUSHES : with soapy water.

PACKAGING : 75 ml bottle

Do not freeze

Applications:

Apply to the object to be decorated clean and dry, with a brush or stencil over the entire surface of the design intended to be gilded. Let dry for about 10 minutes: the mix becomes sticky to the finger. Then apply the gilding: gently place the gilding foil or chips on the glued surface and brush gently with a soft brush (e.g. fan) to smooth. Repeat the operation, working in small successive areas to avoid the mix being dry when applying the gilding. Varnish to protect the decorations once finished.

Cracking kit

OPACITY: Clear FINISH: Crackle gloss

SURFACES: wood, plaster, glass, metal, cardboard...

COVERED SURFACE: 1 kit = about 0,75m².

CLEANING THE BRUSHES: With soapy water step 1/ white spirit for step 2 and patina wax.

PACKAGING: 75ml bottles

Dangerous - Respect the precautions of use.

Applications :

Apply a generous and uniform layer of Crackle Effect on the object

STEP 1. Allow to dry for 2 hours, then apply an even coat of Crackle Effect

STEP 2. Crackling begins to appear in 15 to 20 minutes. They are discreet and subtle. The size of the cracks depends on the thickness of the product used. To reinforce the effect, apply a patina with a cloth, insisting on the cracks: Burnt Shadow Patina, if the general tone of the object is light, Naples Yellow Patina if the tone is rather dark.

Let dry 2 hours. Permanently protect cracks with an even coat of Crackle Effect "STEP 1". Let dry 2 hours before handling.